What a Knitting Stitch Is

A knitted stitch is a loop formed through an existing loop, creating the linked structure of knitted fabric. As you work, stitches move from live loops on a needle to completed loops in the fabric. Patterns describe these actions with abbreviations and repeat markers, so their key terms matter before you begin a row. Knowing what each instruction refers to makes written directions easier to follow.

Loops and live stitches

A knitted stitch is a loop formed by drawing yarn through an existing loop. The existing loop is held on a needle while the new loop is made; this links one stitch to the next. In hand knitting, a live stitch is a loop that has not yet been worked into a following stitch or secured by binding off. It remains open and can still be worked.

When you work a live stitch, the new loop becomes live on the needle, while the previous loop is released and becomes part of the fabric. The change happens stitch by stitch: a loop on the needle is worked, a new loop takes its place, and the earlier loop is no longer live. This distinction helps you tell the stitches still awaiting work from those already formed in the knitted fabric.

Live stitches stay on the needle until you work them or bind them off. At the end of a row, the loops waiting on the needle are therefore still active, even though earlier rows have formed fabric below. Binding off secures those remaining loops so they are no longer live. If a pattern tells you to pause with stitches held on a needle, those loops remain live until the instructions return to them or direct you to bind them off.

Reading a stitch pattern

Pattern abbreviations condense repeated directions into short instructions, but they are still instructions for specific actions. Check the key supplied with each pattern before starting, since abbreviations and punctuation can vary.

  • k means knit; a direction such as k2 tells you to work two stitches using the knit action.
  • p means purl; p3 directs you to work three stitches using the purl action.
  • rep means repeat; the instruction names which action or group of actions to work again.
  • BO means bind off; it directs you to secure stitches at the point specified in the pattern.
  • An asterisk or brackets can mark the start and end of a repeat; follow the pattern key to identify the exact group.

A repeat may continue a stated number of times, across a row, or between specified markers. For example, “*k1, p1; rep from * to end” means repeat the two-stitch sequence from the asterisk to the end of the row. Read the punctuation and repeat count together, then follow the pattern key if a symbol is not defined.

Knit and Purl Stitches

The knit stitch and the purl stitch are two ways to draw a new loop through a loop on the needle. The main difference is the direction of the needle movement and where you hold the working yarn. Those actions create recognizable loop faces, but what you see also depends on which side of the fabric faces you. Knit and purl are related actions made with the same yarn, not separate yarn types.

The knit stitch

To make a knit stitch, you use the working yarn to form a new loop through a live loop on the left needle. Keep the yarn behind the work as the right needle enters the loop.

Work through each loop in this sequence:

  • Insert the right needle from left to right through the front of the first loop on the left needle, keeping the needle tips crossed.
  • Bring the working yarn around the right needle tip, usually from back to front, so it lies between the crossed needle tips.
  • Use the right needle to draw the wrapped yarn through the old loop, creating a new loop on the right needle.
  • Once the new loop is through, let the old loop slide off the left needle; the new loop remains held on the right.
  • Continue with the next live loop, forming one new loop for each old loop worked across the row.

On the side facing you, a knit stitch looks like a small V: its two legs descend from the loop on the needle. The reverse face has a rounded bump at that same stitch. Each completed action transfers the stitch from the left needle to the right without cutting or changing the yarn.

The purl stitch

To purl, hold the working yarn in front of the fabric, toward you, before inserting the right needle. The yarn stays on this side while you form the new loop, unlike in a knit stitch, where it is held behind the work.

Insert the right needle from right to left through the front of the next loop on the left needle. Wrap the front-held yarn around the right needle tip, then draw it through the old loop toward the back. When the new loop is secure on the right needle, slide the old loop off the left needle. The purl action uses the same needles and working yarn as knitting, but the yarn position and direction of needle entry differ.

A purl stitch shows a rounded bump on the side facing you. On the opposite side of that same stitch, the loop has the familiar V-shaped knit appearance. When you turn the fabric, the visible faces switch: a surface that showed knit Vs now shows purl bumps from the reverse. The stitch itself has not changed; only your viewing direction has. This relationship is why knit and purl stitches can form opposite-looking surfaces in one piece of fabric.

For a clear comparison, look at one completed stitch from both sides before working the next row. The front-held yarn and right-to-left needle entry identify the purl action, while the bump facing you identifies its visible face.

Garter and Stockinette Fabric

Garter and stockinette are two foundational knitting stitch patterns, each formed by arranging knit and purl stitches across rows. Their surfaces look different because the stitches meet and face the fabric in different ways. Comparing the two helps you recognize a swatch and assess how its texture may suit a project. Yarn choice, needle size, and knitting tension can change the finished fabric, so treat typical behavior as a guide rather than a guarantee.

Garter stitch

When you work garter stitch flat, the common method is to knit every row. The repeated rows create horizontal ridges on both sides, giving the fabric a visibly textured, reversible surface.

Garter stitch and stockinette worked flat
FeatureGarter stitchStockinette stitch
Flat-work sequenceKnit every row; each pair of rows forms one ridge.Alternate knit rows on the right side with purl rows on the wrong side.
Main surfaceHorizontal ridges appear on both sides of the fabric.The right side has smooth columns of V-shaped stitches.
Reverse surfaceThe reverse also shows ridges, so either side can face outward.The reverse shows rows of rounded purl bumps.
Typical fabric behaviorOften lies flatter at the edges and has a textured, flexible feel.Often curls at the side edges and at the top or bottom.

For a small swatch, look for repeated ridges running across the work; the sequence of knitting every row is what produces them. The ridges make garter stitch easy to identify, while yarn and gauge affect how pronounced they appear and how the fabric drapes.

Stockinette stitch

To work stockinette flat, you knit across one side, then purl across the other, repeating those two rows. The smooth face and bump-textured reverse make this pattern easy to recognize in a finished swatch.

  • On the right side, knit every stitch across the row to form the smooth face of stockinette.
  • On the wrong side, purl every stitch across the row; those stitches create the bump-textured reverse.
  • Repeat the knit-row and purl-row sequence, keeping track of which side faces you before starting each row.
  • Look at the right side for vertical columns of small V-shaped stitches, the defining visible feature of stockinette.
  • Turn the swatch over to see horizontal purl bumps; this reverse is different from the smooth V-shaped face.
  • Expect the fabric to curl at its edges in many yarns, although fiber, needle size, and tension influence the result.
  • Compare swatches made with the same yarn and needles to see how your own knitting tension changes the fabric’s density and drape.

Stockinette creates a smooth area that shows stitch columns clearly, while its reverse has a distinctly bumpy texture. Yarn weight and fiber, needle size, and the way you knit all affect the finished fabric, so its drape and edge curl can vary from one swatch to another.

Ribbing and Seed Stitch

Ribbing and seed stitch use knit and purl stitches in distinct repeated arrangements. Small changes in the order of those stitches create either pronounced vertical columns or a pebbled texture. Pattern directions make each arrangement repeatable by naming the sequence and showing how often to work it. Reading the repeat carefully helps you maintain the intended fabric structure across every row.

Ribbing

Ribbing is a repeating arrangement of knit and purl columns. The knit columns form raised vertical wales, while the purl columns sit farther back as narrow channels. Together, those alternating ridges create a fabric that can stretch across its width and contract again. The width and rhythm of the columns depend on how many stitches you place in each group: a 1×1 rib stitch alternates one knit with one purl, while a 2×2 rib stitch works two knits followed by two purls. The wider groups make the columns more prominent. Pattern instructions describe the column sequence as a stitch repeat. For example, “*K1, P1; repeat from * across” means you work one knit, then one purl, and repeat that pair to the row’s end. A direction such as “*K2, P2; repeat from * across” creates 2×2 ribbing. Check the stated stitch count before starting: a plain 1×1 repeat uses groups of two, and a plain 2×2 repeat uses groups of four. A pattern may add edge stitches or give a different total, so follow its full count rather than assuming every stitch belongs to the repeat. When ribbing is worked flat, the next row’s directions may tell you to knit the knit columns and purl the purl columns. This keeps each raised wale aligned above the column below it. Some patterns write out every row; others use a phrase such as “work stitches as they appear.” In either case, track the visible columns as you work. If a knit column shifts sideways into a purl channel, the repeat has changed and the fabric will no longer show an even rib.

Seed stitch

Seed stitch is a textured fabric made by alternating knit and purl stitches so that the two stitch types sit beside one another rather than forming long columns. Its sequence offsets the visible bumps from row to row, producing a field of small, raised points. The surface looks pebbled instead of showing ribbing’s parallel vertical ridges. Because the sequence changes across the row, seed stitch is often described as a checkerboard-like texture, with individual bumps appearing in alternating positions. A pattern might specify an even-count row as “*K1, P1; repeat from * across,” followed on the next row by “*P1, K1; repeat from * across.” The second sequence shifts the arrangement so the stitches do not stack into continuous columns. With an odd stitch count, directions may instead repeat the same knit-purl sequence on every row; the last stitch and any edge stitches affect how the pattern is written. Follow the stated row instructions rather than changing the order to match an example worked with a different count. Pattern instructions usually give the total number of stitches to cast on and identify the repeated unit, often with asterisks or wording such as “repeat to end.” For instance, a repeat of K1, P1 needs the pattern’s specified stitch count and any stated edge stitches to fit correctly. At the end of a row, check whether the direction says to work a final stitch outside the repeat. That detail keeps the alternating bumps aligned and prevents an unintended column from appearing at the edge.

Choosing a Stitch for a Project

Choose a stitch by matching the fabric’s texture, stretch, appearance, and yarn visibility to the job the finished item needs to do. A close, elastic fabric can help a hat stay in place, while a flatter, less springy fabric may suit a scarf that should hang smoothly; either choice depends on the pattern’s intended fit and drape. For a blanket, consider how the surface feels against skin, whether the fabric lies flat, and how much visual texture you want across a large area, since a highly textured pattern can look busy when repeated over many rows. Yarn changes the result: smooth, solid-colored yarn makes stitch definition easier to see, while strongly variegated or fuzzy yarn can soften small details and make a simple fabric more effective than a complicated pattern. Before substituting a stitch or yarn, follow the pattern’s stated stitch and gauge, then compare your swatch with its measurements; a different fabric structure can change both the dimensions and the amount of yarn needed. These knitting stitch patterns are choices rather than universal rules: use the one whose finished texture, stretch, and appearance fit your project.

Common Stitch Confusions

A frequent mix-up is treating stockinette as one stitch, when it is a fabric pattern formed by arranging knit and purl stitches in rows: when you work flat, knit across the right-side row and purl across the wrong-side row to create the familiar V-shaped face and bumpy reverse. The stitch you make on a needle is a knit or a purl; stockinette names the resulting fabric, just as a repeated sequence can create a pattern without becoming a new basic action. When worked in the round, stockinette is usually made by knitting every round, because you are continuously working from the fabric’s right side rather than turning it to work a wrong-side row. This difference explains why instructions that say “knit every row” produce different fabric when worked flat than when worked in the round, even though the same knit action is used.

Ribbing is also a structure rather than a separate basic stitch: you repeatedly alternate knit and purl stitches, commonly in groups of one knit and one purl for 1×1 rib or two knits and two purls for 2×2 rib, and the sequence forms columns that draw together and stretch across the fabric. A purl bump on one face corresponds to a knit-looking V on the other, so the visible side depends on how you hold or turn the work; a stitch does not become a different stitch when the fabric is viewed from its reverse. Right side and wrong side are labels for the intended orientation of a piece or a particular row, not fixed synonyms for “the side with knits” and “the side with purls.” In a flat stockinette piece, for example, the right-side rows show mostly knit Vs while the reverse rows show purl bumps, but those same bumps and Vs are two views of the loop structure, not separate layers or unrelated stitches. If a pattern marks rows as RS and WS, follow those labels to keep the fabric’s orientation consistent, especially when a design includes texture or motifs that do not look identical on both faces.

Confusing a stitch sequence with its fabric result can make a small deviation look like a new pattern: in flat stockinette, knitting a wrong-side row instead of purling it creates a garter ridge across the face, while changing the knit-purl order in ribbing interrupts the vertical columns. Check the sequence and the side facing you before naming what you see; a close look at several neighboring rows or columns is more reliable than identifying a pattern from one isolated loop. The practical distinction is simple: knit and purl describe actions, while stockinette and ribbing describe structures produced by arranging those actions across rows or rounds.